26
February
0
Comments
Know When Your Garage Door Is Open! A Smarthome.com Tip
in Categories
|
Know When Your Garage Door Is Open!
|
 |
| Attach the X10Pro Wireless Door/Window Magnetic Contacts PDS01 to your garage door in such a way so that the sensor and magnet are together when the garage door is fully closed. Connect the Red and Black wires from the contacts to a Powerflash Interface and plug the Powerflash Interface into any convenient wall receptacle. Set the Powerflash to Mode 3, Input B and then set the House and Unit Code to the same code as the X10 Lamp Module, X10 switch or other X10 signaling device you want to use. When your garage door opens, it will turn on your designated light and turn it off again when it closes. Set the X10 Chime Module to the same code and you will also hear a chime when the door opens. |
Similar Items: