AerielleTM AudioBUG User’s Manual
Introduction
Thank you for purchasing the AudioBUGTM from AerielleTM. AudioBUGTM is a user-friendly portable wireless audio system that lets you enjoy your music collection while on the go.
AudioBUGTM features AerielleTM patented wireless technology to send high-fidelity stereo audio signals from any audio device to any radio or stereo within range up to 15 feet. Simply plug the AudioBUGTM into any audio output source, choose one of the four frequencies (88.1, 88.3, 88.5 or 88.7 MHz) that you wish to broadcast and tune your radio to that frequency. AudioBUGTM gives you the freedom to enjoy your audio where you want, with out the wires.
Before You Begin
Read these instructions thoroughly before setting up your AudioBUGTM. If you need any assistance, please contact customer service department at: (818) 222-7191, or submit an email request to: info@aaaremotes.com
Compatibility
One of the many unique features of AudioBUGTM is that it was designed to work with any portable audio device. This means that no matter what brand or size of audio player you may have, AudioBUGTM is compatible.
Typical uses for AudioBUGTM include:
- Portable MP3 digital audio players
- Portable CD players
- Portable Mini-disc players
- Portable DVD players
- Laptop or Desk Top Computers
AudioBUGTM is compatible with every audio player, and will broadcast to any radio or stereo. Whether it is your surround sound stereo system in your family or living room or on your car stereo, AudioBUGTM just plugs and plays.
Features and Components
 |
1. Power on
2. Frequency Selector 3. 3.5 mm stereo cable 4. Battery Compartment “CR2” |
Auto-Off Functionality
The AudioBUGTM has an auto-off feature. If after more than 80 seconds there is no detection of audio, the AudioBUGTM will turn off. This saves useful battery life. When turning off your audio source, your AudioBUGTM turns off automatically.
Setup Procedure
Setting up your AudioBUGTM is an easy procedure. Simply:
- Remove the battery cover from the top of unit by gently sliding the battery door marked toward you.
- Install 1 CR2 battery with the negative end facing the eyes of the AudioBUGTM.
- Plug the 3.5mm stereo cable into the audio out connector or the headphone jack of the audio source you wish to transmit. *
- Select the frequency that you wish to transmit to with the selector on the side of the AudioBUGTM (88.1, 88.3, 88.5, 88.7 MHz)
- Press the POWER button eye (left EYE) on the front of the unit.
- Tune your FM stereo to the corresponding FM frequency as selected in step # 5
- Adjust the volume on your audio player and stereo or headphone radio for maximum enjoyment.
* Best results achieved when audio level of source is at 3/4. Some audio sources output level is either to high or to low at the line-out jack. If it is to high, the sound might be distorted. If it is to low, the sound might be to noisy. If this happens, connect the AudioBUGTM to the headphone jack and adjust the volume level on your audio device.
Product Specifications
| Modulation: | FM Stereo Modulation |
| Frequencies: | 88.1, 88.3, 88.5, 88.7 MHz |
| Audio Input Connector: | 3.5 mm Stereo Plug |
| Power Requirement: | 1 “CR2” Lithium Battery |
| Battery Life: | 40+ hours typical |
FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by ATO may void the users authority to operate this equipment.
Audio Specifications
| Signal Format: | Standard FM Stereo Format, 38 KHz subcarrier |
| Audio Range: | 15Hz – 15 Khz |
| Signal-to-Noise Ratio:* | > 60 dB |
| Total Harmonic Distortion: | 0.3%, Max. |
| Channel Separation: | 40 dB Typical |
| Channel Balance: | +/- 2 dB |
* A weighted